101240FTACOM401ZA Stacked 2x2 RJ45 1000Base-T Shield No LEDs
- B59(118-05)GP8-19A-4023-C12 Pin to Pin 2x4 Port Gigabit Magnetic rj45 Female Socket
-
Stack Jack LPJG47099CNL Substitute Alternate Part
-
Meets ethernet KVM Over IP Switch
-
High performance for maximum EMI suppression.
-
LAN interface suitable for 1000Base-TX for Communication Controllers
-
Designed for network interface card application
| Characteristics | 10/100/1000Base-T 2x4 Port Gigabit Ethernet Port |
| 2)SMD,THT and THT with USB |
| 3)350μH min,OCL with 8mA bias |
| 4)Complies with IEEE 802.3 |
| 5)Extended temperature range -20°c~70°c available |
| 6)PoE (350mA~720mA) |
| Operation/Application | ×DSL Modems |
| EMbedded PC |
| LAN Applications |
| Hub,Router,Switches |
| AVR,DVR |
| Electrical Characteristics | |
| Shielded | with |
| Termination Features | |
| EMI Finger | with/without |
| Termination Method | Solder |
| Body Features | |
| LED | without |
| EMI Fingers - Top and Sides | with/without |
| Latch Orientation | Tape UP/Down |
| PCB Tail Length | 3.5±0.5mm |
| Height Above Board | Optional |
| Contact Features | |
| Preloaded | YES |
| Contact Termination Type | Through Hole |
| Connector Style | Jack |
| Cores Number | 8 |
| Industry Standards | |
| Lead Free Solder Process | Wave solder capable to 265°c |
| RoHS/elv Compliance History | Always was RoHS Compliant |
| Conditions for Usage | |
| Applies To | Printed Circuit Board |
| Environmental Conditions | Office / Premises |
| Operating Temperature(°c) | -20°c~70°c |
| Other Features | |
| Magnetic Circuit | 3D15 |
| Status Indicator | without |
| Left LED Color | Optional |
| Right LED Color | Optional |
| Decoupling capacitor | with/without |
| Rear PCB Ground Tab | with/without |
| Singal Lead Quantity | 8 |
| NOTES: |  |
| 1.Designed to support application,such as SOHO(ADSL |
| modems),LAN-on-Motherboard(LOM),hub and Switches. |
| 2.Meets IEEE 802.3 specification |
| 3.Connector Materials: |
| Housing: Thermoplastic PBT+30%G.F UL94V-0 |
| Contact: Phosphor Bonze C5210R-EH Thickness=0.35mm |
| Pins: Brass C2680R-H Thickness=0.35mm |
| Shield: SUS 201-1/2H Thickness=0.2mm |
| Contact plating: Gold 6 micro-inches min.In contact area. |
| 4.Wave solder tip temperature: 265℃ Max, 5 Sec Max |
| 5.UL Certification: File Number E484635 |
LINK-PP Established in 1997,is worldwide leader in magnetic telecom,networking components and optical transceiver modules design and manufacturing. With an extensive line of state-of-the-art catalog products as well as custom capabilities, LINK-PP is a global supplier magnetic telecom,networking components and Optical Transceiver Modules,the OEM and ODM are welcome.
LINK-PP,there are 2600 staff at present. With the abundant productive capacity of 6000k per month, we are able to deliver the goods within the short time. Moreover,we can provide the professional complete solution for magnetic components and strong technical support as well. Our products are widely used in networking and communication equipments such as HUB,PC card, Switch, Router ,PC Main board, SDH,PDH,IP Phone, xDSL modem.
Committed to bringing the highest possible level of compliance to international standards, all sites are ROSH6, ISO9000:2008 ISO14001:2004, UL,REACH ,CE, FCC,TUV,FDA Registered.
Product Tags:
|
|
B59(118-05)GP8-19A-4023-C12 Cross LPJG47099CNL Stacked 2x4 RJ45 Shield No LEDs Images
|
